Pump Start Relay

Pump Start Relay


For smaller systems that require a pump, Hydro-Rain offers a pump start relays for pumps up to 2 HP.  Our pump start relay enclosures are constructed with a corrosion resistant, UV resistant, shockproof material. The rain-tight, secure, rustproof enclosure provides a safe and secure connection in a housing built to last.

Features and benefits
Features
  • Works with 1 HP 110VAC or 2 HP 220VAC pumps
  • Works with 24VAC sprinkler controllers
  • Automatically activates pump when the controller activates a valve
  • Locking, weather-resistant case
  • Covered wiring compartment for extra protection
  • Simple, trouble-free design
  • Wide-range AC-activated coil that handles 100-120VAC or 200- 240VAC at either 50 or 60 Hz
  • Conforms to UL, CSA, TUV and meets IEC950
  • Includes test button for relay circuit tests, such as circuit continuity tests.
HRC-PSR
SKU 07009

Pump Start Relay

Specifications
  • 24VAC 50/60Hz
  • Inrush: 79mA
  • Sealed: 71mA
  • Resistance (±10%) 303 Ω
  • Contractor rating (single phase)
  • Double pole, single throw
  • Inductive: 15 AMP
  • Resistive: 25 AMP
  • Input:
    • 110VAC–up to 1 HP
    • 220VAC–up to 2 HP
 
NOTE:
  • Relay must be mounted with test button facing down.
  • Be careful not to touch the test button accidentally. Doing so may turn ON
    the contact.
  • Be sure to use the test button for test purposes only (with test-button
    models). The test button is used for Relay circuit tests, such as circuit
    continuity tests.
  • Do not attempt to switch the load with the test button.
download these docs
HRC PSR CUT SHEET
download these docs
HRC PSR MANUAL
download these docs
HRC PSR MOUNTING TEMPLATE